C3S is a determining player in the international nanosatellite industry whose products and solutions serve and support both scientific payloads and industrial demands throughout the missions. Their mission planning activity encompasses 3-16U, high-reliability platform, and subsystem design, as well as the prelaunch simulation software and hardware development and mission operation environment development.
They develop and manufacture robust structures and highly dependable 3/6/12/16U platforms and redundant, yet affordable subsystems like OBC, EPS, and communication modules to meet the requirements of IoT, Earth Observation, and space monitoring constellation missions.
Beyond the world of CubeSats, they participate in large satellite projects as the designer of power distribution systems and payload synchronization. Their devoted team provides dedicated service from mission planning throughout the operation of the entire mission, until deorbiting.
Products
On-Board Computers (OBC): C3S' OBC is an on-board computer with a single-point failure tolerant design, cold redundancy, high-performance MCU, and optional daughterboard for memory expansion.
Antenna System: The Antenna System (ANT) from C3S Electronics Development is a Satellite Antenna System with a frequency of 386 to 416 MHz, Mass of 150 to 200 gms, Bandwidth of 30 MHz, Input Power of 3 W, and Polarization Linear.
EPS: The C3S EPS-1000 from C3S Electronics Development is a Satellite Electrical Power System with Input Current of 0.75 A, Input Voltage of 8 to 14 V, Mass of 811 g, Output Voltage of 3.3 to 5 V, and Output Current of 4 A.
Click here to learn about Satellite and Space products from C3S.
Click here to know more about Satellite Buses and Platforms by C3S.
